When you are installing a fence, you have at your disposal a variety of options. These options are made of varying types of materials. These materials differ in terms of maintenance needs and the appearance. Wood is one of the most common fencing materials out there. Leaving it in its natural state can give your fence that rustic feel and appearance. However, you are not likely to get long term service from such untreated wood. Thus, you need to stain the wood to extend its life. Staining is different from painting since it allows the natural color of the wood to be seen. These tips on staining can help you learn more about the concept.

Weather Conditions

This is an important consideration before the staining process begins. It should not be dusty or rainy. Windy conditions can blow particles to the fence before it dries, thus, ruining the smooth finish. Rain can wash away some of the staining before it dries meaning you have to redo the project. Therefore, you should be familiar with the weather forecast for the next 48 hours before you call in the fencing contractor for the job.

Staining Method

The application can be done using a brush, a roller, or a spray gun. Using the brush or roller provides a smooth and clean finish but it takes time. The spray gun is faster but it may be difficult to get an even finish. You can discuss with the fencing contractor on which method they are most experienced and whether they can achieve a clean finish.

Preparation

The area around the fence being stained needs to be covered. This is especially the case if you have plants nearby. The staining can damage the leaves of the plants by covering some the pores. Some of the materials that can be used for coverage include plastics covers and plywood. The fence also needs to be inspected prior to staining to check for signs of damage. If there is rotting wood, it should be removed and replaced before staining. Applying staining to the rotten wood does not stop the decay since it continues on the inside. If the wood has been exposed to the elements for a long time, it should be bleached and cleaned. This helps to kill off some of the mold that might have been growing. A fencing contractor would be knowledgeable on all these tips and they would provide the service in a timely and efficient manner.

Share